NTools W-101 Same like Anest Iwata W-101 Spray Gun Gravity Feed Paint HVLP New

Description

NTools W-101 Same like Anest Iwata W-101 Spray Gun Gravity Feed Paint HVLP New :Nozzles 1.0mm or 1.3mm or 1.5mm
or 1.8mm
A
n authentic
spray gun
! ! ! When you place order please specify which nozzle tip do you need ! ! !
! ! ! If you do not specify, We will send you by default 1.3mm nozzle tip spray gun with a cup ! ! !
This NTools spray gun kit complies to ATEX regulation 94/9/EC, protection level II 2 GX.
Nozzle size model:
W-101-101G - 1.0mm
W-101-132G - 1.3mm
W-101-152G - 1.5mm
W-101-181G - 1.8mm
DIY Supplies: Paint & Decorating
Cup Volume: 400ml
Air intet: 1/4"
Nozzle material: Stainless Steel
Feed type: Gravity
Place of Origin: Japan
Type: HVLP (Spray guns with this type of material transfer give you better, more consistent coverage than conventional spray guns and with minimal messy overspray)
Suggested air presure is 2.0 - 3.5 bar (29 to 50 PSI)
Max pressure: 0.68MPa / 6.8Bar / 98 PSI
Max temperature: Atmosphere - /5°C to 40°C/ - Air fluid /5°C to 43°C/
Pattern Width: 150 - 200mm ( 5.9 - 7.9 inch)
A viscosity of 20 seconds / NK-2, mark for 12 seconds / NK-2
All models have a paint connector G 1/4 and Air connection G 1/4
Recommended paint viscosity differs according to paint property and paithing condition
CAUTION:
Never use commercial or other parts instead of Anest Iwata original spare parts
Never immers the hole gun into liquid such as thinner
Never damage holes of air cap a fluid nozzle and fluid needle