Multipurpose Network Cable Tester/Tracer/Length & ethernet w/ 8-Remotes NF868W

Description

Open circuit at mid point on line 4 using. Loopback.
The option to determine wire length will first display lines 1-4 then by pressing Up or Down key displays line 5-8.
This function is also useful when trying to determine the approximate location of a line break.
Open circuit 3& 6 near main unit. Loopback.
Correct wiring.
Open circuit on 4 & 5, remote attached.
For cable tracing the cable is inserted into RJ45 port on the main unit and select scan.
When the probe gets close to the targeted line you the probe will beep the loudest.
The NF868W is a convenient and comprehensive multi-purpose cable tester for network  professionals. There is a main test unit, a tracker/probe and 8 remote identifiers.  This easy to use handheld tester performs 8 main network cable functions plus USB, RJ11 and BNC testing.
The 8-remotes allows for testing and identifying multiple cables without the need to go back and forth.
Multi-purpose Network Tester LCD Display with 8/remote ends NF868W
8 Different Cat Cable Functions
Cable tracing test
Determining network wire length
Measurement setting can be in feet or meters
.
Wire break location and wire mapping using Main unit
Display's short between lines 3 and 6.
Display of open circuit on the far end w/remote.
Loopback (M-S).
•
Trace
LAN network cables RJ45, RJ11 and BNC • Calculates
length
of Network cables (CAT5/6) without need for remote unit • Determines distance to
break point
• Cable
mapping
one-one, crossover and pairing • Function for testing for
open
and
shorts
•
Crosstalk
detection affecting speed degradation • 8 Remote cable identifiers for testing 8 cables at one time, ID1-ID8 (clickable tabs below for more information)
Remote mapping and with identification
Line testing for USB cables, RJ11 cables and BNC
Technical Specs
NF-868W Transmitter specifications
LCD screen
53x25mm
Tone frequency
130kHz
The Max. distance of tracing cable
2000m
The Max. distance of cablemapping
2000m
The Max. distance of cable length testing
1000m
Trace cable coonected to switch
Anti-jamming
Tone mode
2 Tones, adjustable
Compatible with connectors
RJ11,RJ45,BNC,USB
LED lights display
Wiremap, tone, tracing
Cable map indication
LCD (#1- #8)
Shielded indication
LCD (#9)
Low battery display
LCD (6.5V)
Battery type
DC9.0V（NEDA 1604/6F22 DC9V) x 1pc
Dimensions (LxWxD)
185 x 80 x 32mm
NF-868W Receiver specifications
Frequency
130kHz
The Max. working current
Less than 70mA
Earphone jack
1
LED illumination
2 LEDs
Battery type
DC9.0V（NEDA 1604/6F22 DC9V) x 1pc
Dimensions (LxWxD)
218 x 46 x 29mm
NF-868W Remote unit specifications
Remote indentifier
8 pcs
Compatible with connectors
RJ11,RJ45,BNC,USB
Dimensions (LxWxD)
107 x 30 x 24mm
The remote end signals a long tone for identification.
With 8 remotes multiples lines can be identified and tested at one time.
The display shows the ID # of the remote.
My name is Kip and I stand behind all the products I sell.
Products are shipped from Texas.