Ameritan Sun System 2400 Tanning Bed Acrylic Made In USA Fast Shipping

Description

Buy with Confidence Since 1991
AMERITAN SUN SYSTEM 2400TANNING BED ACRYLICS
ACRYLIC TYPE:
BENCH
LENGTH (inches):
76 7/8
WIDTH (inches):
28 7/8
# OF BENDS:
2
BED MANUFACTURER:
AMERITAN
CANNOT FIND WHAT YOU NEED. CONTACT RONNIE THROUGH EBAY MESSAGE AND I WILL GET YOU THE CORRECT ITEM NUMBER.
WORRY FREE PURCHASING!!
ONCE YOU MAKE
PURCHASE
WE WILL CONTACT YOU TO MAKE SURE YOU HAVE ORDERED EXACTLY WHAT YOU NEED
THERE WILL BE AN EXTRA CHARGE FOR SHIPPING OUTSIDE CONTINENTAL USA
LET ME KNOW WHAT YOU NEED AND I WILL GET YOU THE CORRECT EBAY ITEM NUMBER TO PURCHASE
WE CARRY ALL BED MANUFACTURERS ACRYLICS
MADE IN THE USA
If this is not what you're looking for please contact me
for the acrylic you need and I will get you the right item number acrylic
CONTACT RONNIE FOR QUESTIONS
LOTION DISCOUNTS FOR TANNING SALONS AND HOME TANNING BED OWNERS
WE ARE A FULL SERVICE TANNING DISTRIBUTOR
ABOUT US:
WE CARRY FULL LINE OF :
NEW AND USED TANNING BEDS
TANNING BED PARTS
TANNING BED ACRYLICS
TANNING LOTIONS
TANNING SUPPLIES FOR THE SALON
SUNLESS TANNING BOOTHS
AIR BRUSH TANNING SYSTEMS
OVER 21 YEARS SERVING THE TANNING INDUSTRY
INDEPENDENT FAMILY OWNED COMPANY
Free Technical Support to our customers
Our acrylic manufacturer remains the leader
In technology and sales of tanning bed acrylics.
We have  over 2,500 tanning bed acrylics available
They use only the highest grade of acrylic sheet available, thus assuring excellent UV transmission and longevity.
They continuously test our finished acrylics for UV transmission, durability and workmanship to insure each acrylic is of the highest caliper and worthy
All acrylics are re-inspected prior to shipment to assure quality, workmanship and fit.
Frequently Asked Questions about tanning acrylics
Q.
What should I clean my acrylic with.
A.
Only a acrylic cleaner formulated especially for
tanning acrylics should be used.  Household cleaners do not have the germ or bacteria killing strength to sanitize your bed.  Most household cleaners are often irritating to the skin.
Q.
What can I use to clean off finger nail polish.
A.
You can use lighter fluid or another acetone type
solvent to clean the polish off.  Immediately wash the area with bed cleaner to remove all the solvent. If solvent residue remains on the surface, the acrylic may craze.
Q.
How often should I replace my acrylics?
A.
Both acrylics should be replaced every 1500 hours
(2 bulb changes).  Although an acrylic may look
clear after 1500 hours the transmission rate of the acrylic has dropped considerable.  Why put new bulbs in a bed if the full effect doesn't reach the customer?
Q.
What causes crazing in the bends?
A.
Excessive heat or excessive age usually causes
crazing inside of the bends.
Q.
What causes surface crazing?
A.
Surface crazing usually is a result of a non-
indoor tanning lotions being used or an
improper bed cleaning solution.  Since acrylic
is a petroleum based product any products
containing oils will craze the surface.
Q.
Why did my acrylic break or crack?
A.
The Major reasons are:
1. Due to exposure to the radiation an acrylic
only has a life span of about 1500 hours
(2 bulb  changes).  Excessively high UVB
strength of modern lamps also accelerates
the acrylic premature failure.
2. The bed has been overheating due to
cooling fans out or installed incorrectly
3. Excessive weight on the acrylic.  Most
beds will adequately support most
people.  However some beds lack an
adequate support system for the acrylic.
Extra supports can be purchased
if an acrylic breakage problem continues.
Q.
What is Annealing?
A.
Annealing is the process of reheating an acrylic to its molding point and then cooling back down.  This relieves the stress caused in forming.
Q.
Can I repair a cracked acrylic?
A.
Broken acrylics can not be successfully repaired.
Beware
of sites selling        cheaply made tanning bed acrylics, with limited warranties.  Many of these sites use untested foreign made acrylic.
Still the Purest, Clearest, Most Dependable
Choice!
TANNING BED ACRYLICS FOR THE PROFESSIONAL SALON AND HOME TANNING BEDS
WE WILL EMAIL YOU TO VERIFY THAT THIS IS THE ACRYLIC YOU ARE WANTING TO BE SURE YOU GET THE CORRECT ACRYLIC
We always verify your order so that you are getting the correct acrylic
3. WE WILL VERIFY YOUR ORDER BEFORE WE SHIP TO BE SURE YOU ARE GETTING WHAT YOU ORDERED
THANK YOU
RONNIE