-40%
7.6mm ID X 12.4mm OD X 2.4mm CS 70A Duro Nitrile O-ring (Bag of 5)
$ 0.55
- Description
- Size Guide
Description
Pack of 5 7.6mm x 2.4mm o-ringsSEAL INFORMATION
MATERIAL
70A DURO NITRILE
TEMPERATURE RANGE
-40° to +220° F
Need an o-ring size that isn’t listed? Custom orders are available and can be shipped in as little as two business days! Minimum quantity and pricing for custom orders vary depending on the size(s) ordered. First class shipping is typically around .00 per size but does not qualify for shipping discounts on combined orders. Send us a message with the size you need, and we will calculate the price, lead time, shipping, and create a custom listing just for you!
What is an O-ring?
An O-ring, or torus, is a doughnut-shaped object or mechanical gasket generally made from an elastomer. O-rings can also be made from PTFE, other plastic materials, metals, and be made hollow or solid. O-rings often have a round cross-section.
What Do O-rings Do?
An o-ring’s primary use is for sealing. They are designed to be seated in a groove and compressed during assembly between two or more parts, creating a seal at the interface.
O-ring’s are often used in static (non-moving) applications but are also found in dynamic (moving) applications where there is relative motion between the parts and the o-ring itself.
Dynamic (moving) use examples include: rotating pump shafts and hydraulic cylinder pistons.
Examples of static (non-moving) include: fluid or gas sealing applications in which the o-ring is compressed, resulting in zero clearance.
Some o-rings are made with lobed (x-like) cross-sections to work in both static and dynamic applications.
There are around 20 different types of o-rings available to cover these multiple uses. The common round cross-section is the most versatile. This conventional o-ring can be used in almost any application as long as the gland to contain the o-ring is designed correctly and correct size and material are chosen.
NBR- Buna-N - Buna: The Most Popular O-Ring Material
Characteristics: rubber-like elastomer typically with a dull, matte finish. Some have a shiny finish.
Description: General purpose elastomer with use as a seal energizer or low-pressure applications such as hydraulics and pneumatics. This material is resistant to oils, hydraulic fluids, water fuels, and gases. NBR is not suited for brake fluids. It does have good abrasion resistance and compression set. These also have a high tensile strength.
70 Duro Specs
Physical Content Tested
Standard Value
Measured Value
Test Method and Standard
Normal Basic Physical Property
Hardness (Shore A)
75 +- 5
71
ASTMD2240
M100, MPA
4.71
4.7
ASTMD412
Tesible Strength , MPA, Min
> 16
16.06
ASTMD412
Tear Elongation, %, Min
> 300
361
ASTMD412
Proportion, g/cm3
Color
Black
Black
Visual