3 HVLP Air Spray Gun Kit Paint Car Primer Basecoat Clearcoat 1.0 1.4 1.8 w/ Case
$ 46.66
- Description
- Size Guide
Description
Features:Designed to provide equal atomization and partical size for all kinds of surface painting Light weight, ergonomic design and easy trigger pivot reduces operating fatigue Stainless steel nozzle and needle to allow use aqueous based paint for long time Precise 1.8mm,1.4mm & 1.0mm stainless steel needle and nozzle set 3 Knobs for full adjustment: fluid, pattern and air pressure controls Two 1000ml and one 100ml aluminum cups with lids A aluminum carrying case w/ locks for easily taking with Comes with a air regulator with gauge as free gift Ideals for basecoats, clearcoats, single stages and primers CE, GS certification
3 HVLP Air Spray Gun Kit Paint Car Primer Basecoat Clearcoat 1.0 1.4 1.8 w/ Case
Features:
Designed to provide equal atomization and partical size for all kinds of surface painting
Light weight, ergonomic design and easy trigger pivot reduces operating fatigue
Stainless steel nozzle and needle to allow use aqueous based paint for long time
Precise 1.8mm,1.4mm & 1.0mm stainless steel needle and nozzle set
3 Knobs for full adjustment: fluid, pattern and air pressure controls
Two 1000ml and one 100ml aluminum cups with lids
A aluminum carrying case w/ locks for easily taking with
Comes with a air regulator with gauge as free gift
Ideals for basecoats, clearcoats, single stages and primers
CE, GS certification
Applicants:
1.8mm set-up is ideal for the atomization of primers, sealers, thinned latex/oil base, and other medium to heavy viscosity coatings.
This 1.4mm set-up for spraying basecoats, clearcoats, single stage and other light to medium viscosity coatings.
1.0mm spray gun used for tight areas, small jobs and touch up
Specifications:
Air Inlet: 1/4"
Type of Feed: Gravity
Full Size Spray Guns:
Nozzle Size: 1.8 mm,1.4 mm
Recommended Air Pressure: 0-43 psi (0-2.9 bar)
Max. Pressure of Air: 43 psi (2.9 bar)
Paint Capacity: 1000 ml
Average Air Consumption: 5-10 cfm
Pattern Width: 6.3"-9.4" (160-240mm)
Mini Size Spray Gun:
Nozzle Size: 1.0 mm
Recommended Air Pressure: 0-30 psi (0-2 bar)
Max. Pressure of Air: 30 psi (2 bar)
Paint Capacity: 100 ml
Average Air Consumption: 1-4 cfm
Pattern Width: 3.1"-3.9" (80-100 mm)
Fine Adjustment:
The desired pattern and fine atomization can be easily obtained by regulating the Pattern Adjusting Knob and Fluid Adjusting Knob.
Pattern Adjustment:
Turn the Pattern Adjusting Knob to the right until tight will make spray pattern round, or turn left make spray pattern ellipse.
Fluid Adjustment:
Turn the Fluid Adjusting Knob clockwise will decrease the volume of fluid output and counter-clockwise will increase fluid output.
Item Specifics
Brand
ZonCar
Manufacturer Part Number
31VLP004-3-101418-CS
Type
Gravity Feed Spray Gun
Set or Single Item
Set
Accessories
Carrying Case
Features
Ergonomically Designed
Air Inlet Size
1/4in.
Air Inlet
1/4"
Diameter of Nozzle
1.8 mm,1.4 mm,1.0mm
Ideal for
Basecoats, clearcoats, single stages and primers
Warranty
1 Year
UPC
969875143666
Payment
1.We accept only PayPal payment
2.All major credit cards are accepted through secure payment processor PayPal.(* If you use e-check on PayPal, delivery may take longer, as we will hold your order until your e-check clear)
3.Payment must be received within 7 business days of auction closing.
4.Please make sure your PayPal and eBay address is correct. If not, please correct it before payment. Thank you.
5.Custom duties, taxes, or charges are not included in the cost you pay to us.
6.Please check with your country's customs office to determine what these additional costs will be prior to bidding/ buying.
Shipping
1. We ship to your eBay address. Each package will be shipped by UPS or Fedex with tracking number.
3. Ship within 1 business day once payment completed. Orders placed on weekend will be shipped within 3 days.
4. Seriously promise: Refund or resend will be offered if item still not arrive in 7-10 business days. Just send us an email ,we will give you a satisfied solution as soon as possible.
Returns
1.If you are not satisfied when you receive your item, please return it within 30 days for a replacement or money back. Please contact me before you return it.
2.Defective items Must Be reported and returned to us within the warranty period (and in the original packaging, if possible). You must tell us what the defect is and give us your eBay ID.
3.Return shipping is to be paid by the Buyer.
4.We act as a responsible seller; we are willing to actively undertake the following responsibilities:
a. The item is lost during transit;
b. The item is damaged during transport;
c. Due to our work errors, transporting the wrong items to the buyer;
d. The item in the actual use of the process of quality problems.
Contact Us
1.Welcome to my shop,We offer an extensive range of products selected by our professionals.superiority in details and quality is a high priority. We also have a high-standard team, qualified by authorized organizations to ensure products are of the highest quality.
2.As an internet seller, we collaborate with excellent international transport companies, we have our own warehouses, offering the most convenient delivery service possible. On-time shipping and reliable quality control are key areas of importance in our shop.
3.We are increasingly expanding US markets based on high quality products, excellent service, reasonable priceboas and timely delivery. Please contact us at any time for more information.We work hard to make sure EVERY CUSTOMER 100% approvingly.
Feedback
We maintain high standards of excellence and strive for 100% customer satisfaction!
Feedback is very important to us.
If you have any problem, please feel free to contact us via ebay message, we will reply your email within 24 hours (except weekends and holidays). We will do our best to solve your problem as soon as possible.
We appreciate your continued patience and willingness to work with us. Thank you for choosing us and have a great day!
DESCRIPTION
PAYMENT
SHIPPING
RETURN POLICY
CONTACT US
Shop Category
Store Home
Wheel Spacers Adapters
LED Headlight Bulbs
LED Bulbs
TPE Floor Mat
Lift Support
Oxygen Sensor
Other
Hot Item
Universal Adjustable Auto Car Fuel Pressure Regulator + Gauge+ Fitting Kit Black
USD 24.67
Blower Motor Fan Resistor Heater Control w/ Harness For 05-14 Toyota Tacoma
USD 18.99
2Pcs Upstream Downstream O2 Oxygen Sensor 234-4127 For Ford F-150 4.2L 4.6L 5.4L
USD 25.99
Hitch Lock Universal Coupler Trailer Lock Ball Adjustable For 1-7/8" 2" 2-5/16"
USD 27.26
90° O2 Oxygen Sensor Spacer Adapter CEL Eliminator Mini Cat Catalytic Converter
USD 18.59
Help & Info
Payment Policy
Shipping Policy
Return Policy
FAQ
About Us
New List Item
Airmatic Suspension Air Compressor Pump Fits Mercedes BENZ W220 W211 W219
USD 119.99
22 inch 120W SPOT FLOOD COMBO LED Light Bar Offroad Driving 4WD ATV Boat Truck
USD 27.32
Rear Air Suspension Shock Spring Bag For 03-09 Mercedes W211 E320 E500 E350
USD 236.00
Wiring Harness Kit 8ft 12V 40A Relay Fuse Switch ON-OFF For LED Work Light Bar
USD 8.99
3PCS Air Suspension shocks Compressor Pump For Escalade Suburban Yukon 949 000
USD 259.00
3 HVLP Air Spray Gun Kit Paint Car Primer Basecoat Clearcoat 1.0 1.4 1.8 w/ Case
Features:
Designed to provide equal atomization and partical size for all kinds of surface painting
Light weight, ergonomic design and easy trigger pivot reduces operating fatigue
Stainless steel nozzle and needle to allow use aqueous based paint for long time
Precise 1.8mm,1.4mm & 1.0mm stainless steel needle and nozzle set
3 Knobs for full adjustment: fluid, pattern and air pressure controls
Two 1000ml and one 100ml aluminum cups with lids
A aluminum carrying case w/ locks for easily taking with
Comes with a air regulator with gauge as free gift
Ideals for basecoats, clearcoats, single stages and primers
CE, GS certification
Applicants:
1.8mm set-up is ideal for the atomization of primers, sealers, thinned latex/oil base, and other medium to heavy viscosity coatings.
This 1.4mm set-up for spraying basecoats, clearcoats, single stage and other light to medium viscosity coatings.
1.0mm spray gun used for tight areas, small jobs and touch up
Specifications:
Air Inlet: 1/4"
Type of Feed: Gravity
Full Size Spray Guns:
Nozzle Size: 1.8 mm,1.4 mm
Recommended Air Pressure: 0-43 psi (0-2.9 bar)
Max. Pressure of Air: 43 psi (2.9 bar)
Paint Capacity: 1000 ml
Average Air Consumption: 5-10 cfm
Pattern Width: 6.3"-9.4" (160-240mm)
Mini Size Spray Gun:
Nozzle Size: 1.0 mm
Recommended Air Pressure: 0-30 psi (0-2 bar)
Max. Pressure of Air: 30 psi (2 bar)
Paint Capacity: 100 ml
Average Air Consumption: 1-4 cfm
Pattern Width: 3.1"-3.9" (80-100 mm)
Fine Adjustment:
The desired pattern and fine atomization can be easily obtained by regulating the Pattern Adjusting Knob and Fluid Adjusting Knob.
Pattern Adjustment:
Turn the Pattern Adjusting Knob to the right until tight will make spray pattern round, or turn left make spray pattern ellipse.
Fluid Adjustment:
Turn the Fluid Adjusting Knob clockwise will decrease the volume of fluid output and counter-clockwise will increase fluid output.
Payment
1.We accept only PayPal payment
2.All major credit cards are accepted through secure payment processor PayPal.(* If you use e-check on PayPal, delivery may take longer, as we will hold your order until your e-check clear)
3.Payment must be received within 7 business days of auction closing.
4.Please make sure your PayPal and eBay address is correct. If not, please correct it before payment. Thank you.
5.Custom duties, taxes, or charges are not included in the cost you pay to us.
6.Please check with your country's customs office to determine what these additional costs will be prior to bidding/ buying.
Shipping
1. We ship to your eBay address. Each package will be shipped by UPS or Fedex with tracking number.
3. Ship within 1 business day once payment completed. Orders placed on weekend will be shipped within 3 days.
4. Seriously promise: Refund or resend will be offered if item still not arrive in 7-10 business days. Just send us an email ,we will give you a satisfied solution as soon as possible.
Returns
1.If you are not satisfied when you receive your item, please return it within 30 days for a replacement or money back. Please contact me before you return it.
2.Defective items Must Be reported and returned to us within the warranty period (and in the original packaging, if possible). You must tell us what the defect is and give us your eBay ID.
3.Return shipping is to be paid by the Buyer.
4.We act as a responsible seller; we are willing to actively undertake the following responsibilities:
a. The item is lost during transit;
b. The item is damaged during transport;
c. Due to our work errors, transporting the wrong items to the buyer;
d. The item in the actual use of the process of quality problems.
Contact Us
1.Welcome to my shop,We offer an extensive range of products selected by our professionals.superiority in details and quality is a high priority. We also have a high-standard team, qualified by authorized organizations to ensure products are of the highest quality.
2.As an internet seller, we collaborate with excellent international transport companies, we have our own warehouses, offering the most convenient delivery service possible. On-time shipping and reliable quality control are key areas of importance in our shop.
3.We are increasingly expanding US markets based on high quality products, excellent service, reasonable priceboas and timely delivery. Please contact us at any time for more information.We work hard to make sure EVERY CUSTOMER 100% approvingly.
Feedback
We maintain high standards of excellence and strive for 100% customer satisfaction!
Feedback is very important to us.
If you have any problem, please feel free to contact us via ebay message, we will reply your email within 24 hours (except weekends and holidays). We will do our best to solve your problem as soon as possible.
We appreciate your continued patience and willingness to work with us. Thank you for choosing us and have a great day!
All rights reserved.
On Aug-09-21 at 23:40:24 PDT, seller added the following information: