2-Stage 13GPM Hydraulic Log Splitter Pump & 3000PSI Control Detent Valve USA

Description

Store category
Sign Up Now !
You may also like
2-Stage 13GPM Hydraulic Log Splitter Pump & 3000PSI Control Detent Valve USA
Product Description
2-Stage 13GPM Hydraulic Log Splitter Pump
& 3000PSI Control Detent Valve USA
Specifications:
New Hydraulic Log Splitter Pump 13 GPM
Shaft: ½"
Inlet port: 150mm
Outlet port: 230mm
Minimum 8 HP or larger gas engine.
For use with open center hydraulic systems only
Maximum pressure: 3000 PSI
Bolt circle: 2.83in.
4 holes spaced 2" on center
Mounting hole diameter: 344in
Woodruff key: 1/8in
Rotation is clockwise
This 2 stage pump can give you much faster cycle times and higher possible pressures with a small engine. Excellent for use on log splitters. 85% efficient.
The HI/LO section of the pump is all aluminum and the end plates are cast steel. Applications for the HI/LO pump are log splitters, presses etc where rapid movement of the cylinder at low pressure is required prior to automatically switching to the high pressure mode to meet load requirements.
Packing Include:
1 PC 13 GPM Hydraulic Log Splitter Pump
Payment
Delivery details
Terms of sales
About us
Contact us
Payment
We accept ebay payment 。
Fees such as import duties, taxes are not included in the item price or shipping costs. These charges are the buyer's responsibility.
Delivery details
Shipping:
The item will be shipped from our US warehouse to United States, which is more faster than from aboard.
2-9 working days to: USA
Terms of sales
We maintain high standards of excellence and strive for hundred percent customer satisfaction. Feedback is very important to us. We hope that you contact us immediately before you give neutral or negative feedback, so that we can address your concerns. It is impossible to address issues if we do not know about them!
About us
Your satis
faction is our ultimate goal. We work hard to earn your trust and future business. Our certified technicians have tested each item before shipping. The unit comes with 1 year limited warranty on all manufacturing defects.
a) If you receive a defective item, you may return it or ask for a discount. Please contact us within 14 days after you receive the package.
b) What you returned must be intact and in its original packaging as re? u. Customer is responsible for shipping costs of the returned item.
c) We will cover the cost of shipping back t with the shipping rate indicated in the registration page. We will send you a new unit or refund the full payment you paid.
Thank you.
Contact us
Business Hour
Business Hour: Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)
Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.
Please contact us with ebay message.
Please feel free to contact us if you have any questions.
: Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)
Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.
Please contact us with ebay message.
Please feel free to contact us if you have any questions.
2-Stage 13GPM Hydraulic Log Splitter Pump & 3000PSI Control Detent Valve USA Specifications: New Hydraulic Log Splitter Pump 13 GPM Shaft: ½" Inlet port: 150mm Outlet port: 230mm Minimum 8 HP or larger gas engine. For use with open center hydraulic systems only Maximum pressure: 3000 PSI Bolt circle: 2.83in. 4 holes spaced 2" on center Mounting hole diameter: 344in Woodruff key: 1/8in Rotation is clockwise This 2 stage pump can give you much faster cycle times and higher possible pressures with a small engine. Excellent for use on log splitters. 85% efficient. The HI/LO section of the pump is all aluminum and the end plates are cast steel. Applications for the HI/LO pump are log splitters, presses etc where rapid movement of the cylinder at low pressure is required prior to automatically
On Jul-12-21 at 02:44:12 PDT, seller added the following information: