11 GPM Hydraulic Log Splitter Pump, 2 Stage Hi Lo Gear Pump, Logsplitter, NEW

Description

Yaegoo 11GPM 2Stage Hydraulic Log Splitter Pump, 3000PSI
Features:
1/2" Shaft with key measures 1.38" long
4 Bolt hole pattern
1" Barb on inlet port
1/2" NPT threads on outlet port
Rotates clockwise
This 11 gallon per minute hydraulic pump is a must have for any log splitter application.
Fits a wide range of applications, most commonly used on log splitters with a rated force less than 35 TON.
This 2 stage gear pump allows for maximum speed without a loss of pressure. Pump is preset to gear down at 500 psi.
This replacement pump fits a wide variety of log splitters and outdoor power equipment. Pumps work in horizontal and vertical positions.
***Not designed for use with “universal” or "tractor" hydraulic fluid
*** Note: Suction-side filtration should be no finer than 150 micron.
Use of a 10-25 micron filter on the suction side of the pump is too restrictive and will cause failure.
Make sure hydraulic fluid reservoir is not below pump to ensure a sufficient flow of oil to the pump.
SHIPPING FREE FROM USA TO USA!!!
No months-long wait from overseas!