1 Gallon Bladder Accumulator

Description

1 gallon bladder accumulator: 1 1/4" Sae standard bladder. 3000 psi: bottom repairable. Please contact us for orders larger than 10 pieces-discounts may apply for bulk orders. Please check out our other sizes we do 1 gallon all the way to 15 gallon accumulators thanks we are the manufacturer! Won’t find any better deals!!
A hydraulic bladder accumulator is the hydraulic equivalent of a spring in that it stores energy and dampens an impulse or force.
Storage of an incompressible, high pressure hydraulic fluid is accomplished through the use of compressed nitrogen gas in an elastomeric bladder enclosed in a high strength steel pressure vessel.
The nitrogen gas is precharged to a percentage of the maximum desired hydraulic pressure, and as the hydraulic fluid is pumped into the accumulator, the gas compresses as pressure is increased. Upon demand from the hydraulic system, the stored hydraulic energy allows for rapid discharge or absorption of pressure impulses.
APPLICATIONS
Energy & Pump Maintenance Savings:
Reduction of pump capacity requirements which provide long term energy savings and lower pump maintenance costs.
Surge Control & Shock Absorbers:
Pulsation dampening and noise reduction caused by pumps and “water hammer”.
Eliminate Sudden Pressure Drops:
Maintain constant pressure on a hydraulic system such as a press line where multiple presses are opened and closed at different times.
Thermal Expansion:
Compensates for pressure variations caused by temperature changes within a hydraulic circuit.
Emergency Back-Up & Safety Failsafe:
Provides stored fluid power for operation of hydraulic equipment power failure.
Welltrol Accumulators is here to save you money and time
with
all your Accumulators and Spare Parts needs!