1.4/2.5mm HVLP Gravity Feed SPRAY GUN Kit w/ Regulator Auto Paint Primer Flake

Description

Specifications:
Air Inlet: 1/4"
Type of Feed: Gravity
Diameter of Nozzle: 1.4mm/ 2.5mm
Recommended Air Pressure: 29-50.7 PSI (2.0-3.5 BAR)
Max. Pressure of Air: 90 PSI (6.2 BAR)
Paint Capacity: 1L
Average Air Consumption: 4.2-7.1 CMF (117-199 L/MIN)
Pattern Width: 7.1" -9.84"
A-weighted Sound Pressure Level: 74.5 dB(A)
Sound Power Level: 85.5 dB(A)
Features:
1.4/2.5mm HVLP Gravity Feed SPRAY GUN Kit w/ Regulator Auto Paint Primer Flake
Specifications:
Air Inlet: 1/4"
Type of Feed: Gravity
Diameter of Nozzle: 1.4mm/ 2.5mm
Recommended Air Pressure: 29-50.7 PSI (2.0-3.5 BAR)
Max. Pressure of Air: 90 PSI (6.2 BAR)
Paint Capacity: 1L
Average Air Consumption: 4.2-7.1 CMF (117-199 L/MIN)
Pattern Width: 7.1" -9.84"
A-weighted Sound Pressure Level: 74.5 dB(A)
Sound Power Level: 85.5 dB(A)
Features:
Designed to provide equal atomization and partical size for all kinds of surface painting
Stainless steel needle and nozzle accommodate a variety of coatings
Light weight, ergonomic design and easy trigger pivot reduces operating fatigue
Precise 1.4mm/2.5mm stainless steel needle and nozzle set
3 Knobs for full adjustment: Fluid, Pattern and Air Pressure Controls
1L Aluminum Fluid Cup with Lid
Comes with a True Micrometer Air Regulator with Gauge as free gift
Ideal for spraying basecoats, clearcoats and other light to medium viscosity coatings(for 1.4mm)
Ideal for spraying basecoats, clearcoats and other high viscosity coatings such as Extreme High Build or Polyester Primers, Thick Enamels, Latex Paints, Chip Guard, Metal Flakes, Gel Coats, Liquid Mask, Etc(for 2.5mm)
Fine Adjustment:
The desired pattern and fine atomization can be easily obtained by regulating the Pattern Adjusting Knob and Fluid Adjusting Knob.
Pattern Adjustment: Turn the Pattern Adjusting Knob to the right until tight will make spray pattern round, or turn left make spray pattern ellipse.
Fluid Adjustment: Turn the Fluid Adjusting Knob clockwise will decrease the volume of fluid output and counter-clockwise will increase fluid output.
Package Includes:
1x HVLP Spray Gun with a (1.4mm/2.5) Fluid Tip
1x Aluminum Cup with Lid
1x True Micrometer Air Regulator with Gauge
1x Spanner Wrench
1x Screw set
1x Brush
2x Cup Filters
1x Instruction Manual (General for some models)
Item Specifics
Brand :
Precision Auto Labs
Manufacturer Part Number :
Does Not Apply
Warranty :
Yes
UPC :
Does not apply
Air Inlet :
1/4"
Type of Feed :
Gravity
Diameter of Nozzle :
1.4mm/ 2.5mm
Recommended Air Pressure :
29-50.7 PSI (2.0-3.5 BAR)
Max. Pressure of Air :
90 PSI (6.2 BAR)
Paint Capacity :
1L
Average Air Consumption :
4.2-7.1 CMF (117-199 L/MIN)
Pattern Width :
7.1" -9.84"
A-weighted Sound Pressure Level :
74.5 dB(A)
Sound Power Level :
85.5 dB(A)
Payment
Paypal will allow you to pay by credit card,debit card,log in
Payal for details.
We accept paypal ONLY, if you use the credit card to pay,the money will handle by the bank,and need many days
to enter into our compnay's paypal accout.
Shipping
We usually ship within one business day after receiving your payment.
Time of delivery:
US: about
1-6
business days; Other countries: about
7-15
business day
Returns
We're confident in the product we sell.
But sometimes the item will be damaged during the transit as which rough and tough and out of our control.
If your item is defective or damaged when you received it, Pls kindly let us know asap.
Take a photos of the damaged items to us,once we confirmed it,we will give you satisfied solution.
We can resend or refund once we confirmed.
But Shipping charges are non-refundable. All returned parts MUST be for refund. 10% restocking fee may be applicable.
Customer
Our company have been in auto parts industry since 1995. We focus on providing the most superior quality parts, we value our business and customer, and we will provide with the best choice and price for you. Welcome your visit and happy shopping!
Feedback
We know everyone have right to protect theirself
Rights and interests.
But pls turst us,we are honest and responsible seller.
we will always stand by your side to help you solve the problem.
If don't mind, please take one-minute and leave us a positive comment and 5-star Detailed Seller Ratings to us, which are of vital importance to the growth of our small company.
YOUR SATIFISACTION IS OUR FIRST PRIORITY!!
We BEG that PLEASE DO NOT leave us 1, 2, 3 or 4-star Detailed Seller Ratings because they mean "you are NOT satisfied", equaling negative feedback. if you are not satisfied in any regard, please email us first for satisfied solution.
Thank you very much for your kindness and understanding!
DESCRIPTION
PAYMENT
SHIPPING
RETURN POLICY
CONTACT US
BRAND
WARRANTY
Hot Item
1.4mm 1L HVLP Gravity Feed Spray Gun Air Regulator Auto Paint Basecoat Clearcoat
USD 27.99
1.4MM HVLP Gravity Feed Spray Gun Air Regulator Auto Paint Basecoat Clearcoat
USD 36.50
2.5mm HVLP Gravity Feed SPRAY GUN Kit w/ Regulator Auto Paint Primer Metal Flake
USD 27.99
2.5mm HVLP Air Paint Spray Gun Auto Car Detail Touch Up Sprayer Gravity Repair
USD 27.99
Shop Category
Store Home
Ignition coil
LED work light
◈  18W LED
◈  27W LED
Ignition wire kits
Pump
◈  Air Pump
◈  Electric Fuel Pump
◈  Fuel Pump
Impeller
Tire accessories
40% off
20% off
50% off
Air Conditioning & Heat
Air Intake & Fuel Delivery
Boat Parts
Diagnostic Service Tools
Grease Gun
Ignition System
Keyless Entry Remotes and Fobs
LED Work Lights
Pressure Gauge Tester
Motorcycle Parts
Other
New List Item
2.5mm HVLP Gravity Feed SPRAY GUN Kit w/ Regulator Auto Paint Primer Metal Flake
USD 27.99
1.4mm 1L HVLP Gravity Feed Spray Gun Air Regulator Auto Paint Basecoat Clearcoat
USD 27.99
1.4MM HVLP Gravity Feed Spray Gun Air Regulator Auto Paint Basecoat Clearcoat
USD 36.50
2.5mm HVLP Air Paint Spray Gun Auto Car Detail Touch Up Sprayer Gravity Repair
USD 27.99
Return Policy
1.4/2.5mm HVLP Gravity Feed SPRAY GUN Kit w/ Regulator Auto Paint Primer Flake
Specifications:
Air Inlet: 1/4"
Type of Feed: Gravity
Diameter of Nozzle: 1.4mm/ 2.5mm
Recommended Air Pressure: 29-50.7 PSI (2.0-3.5 BAR)
Max. Pressure of Air: 90 PSI (6.2 BAR)
Paint Capacity: 1L
Average Air Consumption: 4.2-7.1 CMF (117-199 L/MIN)
Pattern Width: 7.1" -9.84"
A-weighted Sound Pressure Level: 74.5 dB(A)
Sound Power Level: 85.5 dB(A)
Features:
Designed to provide equal atomization and partical size for all kinds of surface painting
Stainless steel needle and nozzle accommodate a variety of coatings
Light weight, ergonomic design and easy trigger pivot reduces operating fatigue
Precise 1.4mm/2.5mm stainless steel needle and nozzle set
3 Knobs for full adjustment: Fluid, Pattern and Air Pressure Controls
1L Aluminum Fluid Cup with Lid
Comes with a True Micrometer Air Regulator with Gauge as free gift
Ideal for spraying basecoats, clearcoats and other light to medium viscosity coatings(for 1.4mm)
Ideal for spraying basecoats, clearcoats and other high viscosity coatings such as Extreme High Build or Polyester Primers, Thick Enamels, Latex Paints, Chip Guard, Metal Flakes, Gel Coats, Liquid Mask, Etc(for 2.5mm)
Fine Adjustment:
The desired pattern and fine atomization can be easily obtained by regulating the Pattern Adjusting Knob and Fluid Adjusting Knob.
Pattern Adjustment: Turn the Pattern Adjusting Knob to the right until tight will make spray pattern round, or turn left make spray pattern ellipse.
Fluid Adjustment: Turn the Fluid Adjusting Knob clockwise will decrease the volume of fluid output and counter-clockwise will increase fluid output.
Package Includes:
1x HVLP Spray Gun with a (1.4mm/2.5) Fluid Tip
1x Aluminum Cup with Lid
1x True Micrometer Air Regulator with Gauge
1x Spanner Wrench
1x Screw set
1x Brush
2x Cup Filters
1x Instruction Manual (General for some models)
Item Specifics
Brand :
Precision Auto Labs
Manufacturer Part Number :
Does Not Apply
Warranty :
Yes
Air Inlet :
1/4"
Type of Feed :
Gravity
Diameter of Nozzle :
1.4mm/ 2.5mm
Recommended Air Pressure :
29-50.7 PSI (2.0-3.5 BAR)
Max. Pressure of Air :
90 PSI (6.2 BAR)
Paint Capacity :
1L
Average Air Consumption :
4.2-7.1 CMF (117-199 L/MIN)
Pattern Width :
7.1" -9.84"
A-weighted Sound Pressure Level :
74.5 dB(A)
Sound Power Level :
85.5 dB(A)
Payment
Shipping
Returns
Customer
Feedback
Paypal will allow you to pay by credit card,debit card,log in
Payal for details.
We accept paypal ONLY, if you use the credit card to pay,the money will handle by the bank,and need many days
to enter into our compnay's paypal accout.
We usually ship within one business day after receiving your payment.
Time of delivery:
US: about
1-6
business days; Other countries: about
7-15
business day
We're confident in the product we sell.
But sometimes the item will be damaged during the transit as which rough and tough and out of our control.
If your item is defective or damaged when you received it, Pls kindly let us know asap.
Take a photos of the damaged items to us,once we confirmed it,we will give you satisfied solution.
We can resend or refund once we confirmed.
But Shipping charges are non-refundable. All returned parts MUST be for refund. 10% restocking fee may be applicable.
Our company have been in auto parts industry since 1995. We focus on providing the most superior quality parts, we value our business and customer, and we will provide with the best choice and price for you. Welcome your visit and happy shopping!
We know everyone have right to protect theirself
Rights and interests.
But pls turst us,we are honest and responsible seller.
we will always stand by your side to help you solve the problem.
If don't mind, please take one-minute and leave us a positive comment and 5-star Detailed Seller Ratings to us, which are of vital importance to the growth of our small company.
YOUR SATIFISACTION IS OUR FIRST PRIORITY!!
We BEG that PLEASE DO NOT leave us 1, 2, 3 or 4-star Detailed Seller Ratings because they mean "you are NOT satisfied", equaling negative feedback. if you are not satisfied in any regard, please email us first for satisfied solution.
Thank you very much for your kindness and understanding!
Copyright of XXXX. All rights reserved.
Powered by SoldEazy